Electrician in Etobicoke
Electrician in Etobicoke
Serving Etobicoke
From Kingsway century homes to Markland Wood's aluminum-era subdivisions and the Humber Bay condo towers — electrical work matched to what Etobicoke actually has behind its walls.
Etobicoke is Toronto’s post-war suburb, and it shows in the wiring. A third of its homes went up between 1961 and 1980 — the exact window when aluminum branch wiring was standard in Canadian construction. That single fact drives more of our Etobicoke work than anything else, and it’s the first thing we look for when we open a panel here.
Copper pigtailing at every device, or a full rewire where it's warranted — with the ESA certificate insurers ask for.
Learn more →Federal Pioneer panels, 100-amp services, and no free breaker slots. We upgrade to modern 200A, permits and Toronto Hydro handled.
Learn more →Dead outlets, warm switch plates, breakers that won't stay on — properly diagnosed, not guessed at.
Learn more →Level 2 chargers for Etobicoke's driveways and garages, load-calculated so you don't pay for an upgrade you don't need.
Learn more →
Recessed lighting and fixture upgrades in split-levels, bungalows, and condo units alike.
Learn more →Kitchen and basement renos coordinated with your GC — rough-in through ESA final.
Learn more →Humber Bay and Etobicoke Centre in-suite work, with the insurance certificates and booking your building requires.
Learn more →Panel failures, burning smells, and dead power — answered around the clock.
Learn more →Etobicoke’s population went from 19,000 in 1941 to 283,000 in 1971. That boom left a very specific electrical fingerprint.
Mimico, New Toronto, Long Branch and The Kingsway predate the boom — Kingsway Park was largely built in the 1920s. Here you'll still find knob-and-tube, cloth wiring, and ungrounded circuits under otherwise beautifully maintained houses.
This is Etobicoke's dominant era — a third of all homes. Markland Wood is the clearest case in the city: over 90% of its housing predates 1981, but under 20% predates 1961, meaning almost the entire neighbourhood was wired during the aluminum-branch-wiring years. Eringate, Kingsview Village and Etobicoke West Mall follow the same pattern.
The old motel strip is now Humber Bay Shores — over 90% high-rise, almost none of it built before 1961. Modern service, modern panels, and an entirely different job: in-suite lighting, dedicated circuits, smart devices, and building coordination.
Aluminum wiring is not automatically dangerous — the Ontario code still permits it, and the ESA’s own position is that it’s safe when connections and terminations are made properly. The danger is in the connections loosening over decades, and in the wrong contractor mishandling the remediation. We do it the right way: proper copper pigtailing with approved connectors at every device, an honest assessment of whether a full rewire is actually justified, and the ESA documentation your insurer will ask for at renewal. No scare tactics, no upselling a rewire you don’t need.
Lakeshore to Rexdale, Kingsway to Markland Wood. See every area we cover on our service areas page.
Homes built roughly between 1965 and 1978 are the ones to check — which covers a large share of Etobicoke's subdivisions. The wire jacket is often stamped "ALUMINUM" or "ALUM", and the conductors themselves are silver rather than copper-coloured. Don't go pulling devices out of walls to look; an electrician can confirm it safely in minutes during an inspection.
Usually not. In most cases the accepted remediation is copper pigtailing with approved connectors at every device and termination, documented with an ESA certificate. A full rewire only makes sense when there's other damage, an active renovation opening up the walls, or an insurer specifically requiring it. We'll give you the honest version.
Many will, but most now require an inspection by a licensed electrical contractor and often proof of remediation. Policies have tightened noticeably in the last couple of years. If your renewal is coming up and you've been asked about your wiring, an inspection with documentation is usually what resolves it.
Yes. We carry the certificates of insurance buildings require, book elevators and access through property management, and are used to the realities of concrete ceilings and compact in-suite panels.
Most electrical work in Ontario must be filed with the Electrical Safety Authority. As an ESA/ECRA-licensed contractor (Licence #7014949) we handle the notification and inspection on every job that requires it. Etobicoke is served by Toronto Hydro, so any disconnect and reconnect at the mast or meter gets coordinated with them as part of the job.
Aluminum wiring, panel upgrades, EV chargers, or a dead outlet — get a straight answer and a clear price.