Key takeaways
- We typically quote $65–$125 per connection point — roughly $3,800–$8,500 for a typical 1960s–70s detached house.
- Most houses need remediation, not a rewire: every termination made with methods rated for aluminum.
- The number of points — including fixtures, switches and junction boxes — is the biggest cost variable.
- Rewiring makes sense mainly when walls are already open or previous work is poor.
- Ask your insurer what they need before choosing, and keep the ESA documentation with your house records.
If you own a house built in the late 1960s or 1970s anywhere in the GTA — much of Etobicoke, Mississauga, North York and Scarborough — there is a reasonable chance some or all of its branch circuits are aluminum. You may have found out from a home inspection report, an insurance renewal, or an electrician who opened a receptacle box.
The first thing to know is that aluminum branch wiring is permitted in Ontario and most houses that have it do not need to be rewired. What they need is remediation: every connection where aluminum meets a device or a copper wire made with a method rated for aluminum. Our guide to aluminum wiring in Ontario explains why the connections, not the wire, are the problem.
This guide is about cost. The short version: we typically quote $65 to $125 per connection point for remediation, which for a typical detached house of that era works out to roughly $3,800 to $8,500. Targeted replacement of selected circuits typically runs $5,000 to $14,000, and a full copper rewire of a 1,500 to 2,500 square foot detached house $16,000 to $30,000. All figures are before HST, and the number of connection points is the biggest single variable.
What remediation actually involves
Remediation means opening every box where aluminum conductors terminate — receptacles, switches, light fixtures, junction boxes, and the panel — and making each connection with a method rated for aluminum. There are two standard approaches.
- Copper pigtails with approved connectors. A short copper conductor is joined to the aluminum with a connector specifically approved for aluminum-to-copper connections, and the copper end goes to an ordinary device. This is the most common method, because it lets you use any modern device afterwards.
- Devices rated for aluminum. Receptacles and switches marked CO/ALR accept aluminum directly on their screw terminals. Useful where box space is tight, but it limits future device choices, and some device types are not available in an aluminum-rated version.
Either way, the work is done box by box, with the circuit de-energised, and the panel terminations are checked so every breaker is rated for the conductor it holds. It is notifiable to the Electrical Safety Authority. Done properly, it leaves the walls intact — which is why it costs a fraction of a rewire.

What is not remediation: swapping in ordinary devices, wrapping connections in tape, using standard twist-on connectors that are not rated for aluminum-to-copper, or pushing aluminum into push-in terminals. Those are exactly the conditions that gave aluminum wiring its reputation.
What we typically quote in 2026
These are the ranges we typically quote in Toronto and the west GTA. They assume ordinary access and are before HST. Every quote we write states the number of points it assumes and the method we will use.
| Scope | What it covers | Typical cost |
|---|---|---|
| Per connection point | Receptacle, switch, fixture or junction box remediated with approved connectors or CO/ALR devices | $65–$125 per point |
| Whole-house remediation | A typical 1960s–70s detached house, roughly 45–70 points, panel terminations checked | $3,800–$8,500 |
| Targeted rewire | Selected aluminum circuits replaced with copper, often in a renovated area | $5,000–$14,000 |
| Full copper rewire | Detached house, 1,500–2,500 sq ft, walls opened and patched | $16,000–$30,000 |
A connection point is any box with aluminum in it, not just the receptacles you can see. Light fixtures, switches, smoke alarms on branch circuits, and buried junction boxes all count, which is why a careful count matters before you compare quotes. A typical three-bedroom bungalow of the era has more points than most owners expect.
The ESA notification is included in our quotes. The ESA’s published minimum notification fee is $92; anything above that on a “permit” line is the contractor’s time, which is legitimate as long as it is described honestly. See our electrician cost guide for how ESA fees actually work.
What moves the price
- The number of points. The single biggest variable. Two houses of the same size can differ by 30 percent in point count depending on how many lights, switches and junction boxes they have.
- Box space. Pigtailing adds a connector and a short wire to every box. Older boxes are often already crowded, and a box that is too full for the extra conductors needs an extension ring or replacement — more time per point.
- Access. Fixtures on high ceilings, boxes behind built-ins, and junction boxes buried in finished basements all take longer.
- Condition and previous work. Decades of renovation leave surprises: improper splices, ordinary devices swapped onto aluminum, damaged insulation. Each one found is fixed, and a quote should say how such findings will be handled.
- The panel. Breakers must be rated for aluminum conductors where they terminate aluminum. In an older panel, that can mean replacing some breakers, or occasionally the panel itself. Our panel upgrade cost guide covers that side.
- Documentation. If your insurer wants written confirmation of the work, include that in the scope from the start.
Remediation or rewire: how to decide
Remediation is usually the right answer, but not always. Rewiring starts to make more financial sense when:
- You are renovating anyway. With walls open, replacing the circuits in the renovated area costs little more than remediating them, and you never think about them again. Our renovation electrician page covers how we plan this.
- The point count is very high relative to the number of circuits, or box after box needs replacing for space.
- Previous work is poor — improper splices, damaged insulation, undocumented alterations — and remediating it would mean chasing problems around the house.
- You need major new capacity anyway, such as a service upgrade for a heat pump or EV charger plus new circuits, and the new layout would leave little original wiring in use.
- Your insurer will not accept remediation. Uncommon, but ask before deciding.

A useful middle path is common in Etobicoke and Mississauga bungalows: remediate the whole house now, and replace the circuits in each area as it is renovated. You get a safe house immediately and a copper house over time, without paying to open finished walls.
Insurance, buying and selling
Insurance. Insurers vary widely. Some ask nothing about aluminum wiring; some ask whether it has been remediated; some want a written assessment from a licensed electrical contractor before they will renew or bind. Call your insurer before getting quotes and ask exactly what they need — it decides the scope.
Buying. Aluminum wiring in an inspection report is a negotiation point, not a deal-breaker. A licensed contractor’s assessment during your conditional period tells you how much of the house is aluminum, what condition the terminations are in, and what remediation would cost, which is far more useful than a line in a general inspection report. Our electrical inspection service is designed for exactly this.
Selling. Documented remediation — with an ESA-inspected notification on file — turns an inspection flag into a resolved item. It is worth keeping the paperwork with your house records.
How to compare remediation quotes
Remediation quotes vary more than almost any other electrical quote, mostly because they assume different scopes. Line them up against these questions:
- How many points does it assume, and does that include fixtures, switches and junction boxes, or only receptacles?
- Which method and which connectors? Approved aluminum-to-copper connectors, or CO/ALR devices — and in which locations?
- Are panel terminations included?
- How are surprises handled? A per-item price for boxes that need replacing or faults found is fair; an open-ended “extras as required” is not.
- Is the ESA notification included, and will you receive documentation suitable for your insurer?
Ontario’s consumer protection rules require renovation contracts to be written and itemised, and limit overruns on a written estimate unless you agree to the change in writing. A quote that answers these five questions is one you can compare.
How long it takes, and what it is like to live through
One of the advantages of remediation over rewiring is that the house stays livable. For a typical detached house, the work usually takes two to four working days, depending on the point count and how accessible the boxes are.
We work circuit by circuit. Power is off only on the circuit being worked on, so the fridge, furnace and network can usually stay on for most of the day. Every receptacle, switch and fixture on the circuit is opened, remediated and closed before the circuit is re-energised and tested. Cover plates go back on, and the only visible change is often new devices.
Plan for a few practical things:
- Access to every room, including closets, the basement and any rooms behind locked doors.
- Furniture moved away from walls where receptacles sit behind it.
- Short interruptions to lighting in each room as its circuit is done.
- A panel visit at the start, to identify circuits, and at the end, to check terminations.
At the end you should receive a summary of what was done: the number of points, the method used, any problems found and fixed, and confirmation of the ESA notification. That summary is what your insurer and a future buyer will ask for.
Why this is not a DIY job
Aluminum remediation looks simple — a connector and a short wire — and it attracts a lot of weekend attempts. It is one of the jobs where homeowner work most often creates the very problem it was meant to fix.
The connectors are specific and their installation instructions matter; the wrong twist-on connector, the wrong torque, or a nicked aluminum conductor creates a connection that can overheat. Every box in the house has to be found and done, including the ones nobody remembers. And the work is notifiable: an unrecorded remediation does nothing for your insurer or your buyer.
If you are not sure whether your house has aluminum wiring, or whether earlier work was done properly, a licensed assessment answers both. We cover the aluminum-heavy neighbourhoods closely — see rewiring in Etobicoke and rewiring in Mississauga — and the wider picture is in our Ontario electrical myths guide.

Frequently asked questions
How much does it cost to fix aluminum wiring in Ontario?
We typically quote $65 to $125 per connection point for remediation, which is roughly $3,800 to $8,500 for a typical 1960s or 70s detached house, before HST. Targeted rewiring of selected circuits typically runs $5,000 to $14,000, and a full copper rewire $16,000 to $30,000 for a 1,500 to 2,500 square foot detached house.
Is it cheaper to pigtail aluminum wiring or rewire?
Remediation by pigtailing is far cheaper than rewiring for most houses, because the walls stay closed. Rewiring becomes the better value mainly when walls are already open for a renovation or previous work has left the wiring in poor condition.
How many connection points does a typical house have?
A typical detached house of the era has roughly 45 to 70 points, counting receptacles, switches, light fixtures and junction boxes. The count varies widely, which is why a quote should state the number it assumes.
Do I need a permit to remediate aluminum wiring?
Yes. The work is notifiable to the Electrical Safety Authority and should be done by a licensed electrical contractor, who files the notification and arranges inspection. The documentation is also what your insurer and future buyers will want to see.
Will my insurance cover a house with aluminum wiring?
Most insurers will, but requirements vary. Some ask for remediation or a written assessment from a licensed electrical contractor. Ask your insurer exactly what they need before choosing between remediation and rewiring.
How long does aluminum wiring remediation take?
For a typical house, usually two to four working days, depending on the number of points and access. The house stays occupied, and power is off only on the circuit being worked on.
Prices are what Northcliffe Electric typically quotes in Toronto and the west GTA in 2026, before HST; your quote will state the point count and method. Rewire ranges match our published rewiring guidance. ESA minimum notification fee from the ESA’s published 2026 residential fee schedule. Aluminum wiring’s status in Ontario per the Electrical Safety Authority’s published guidance.


